ARH

German AR's ARH line array is a passive two-way speaker system, which adheres to the consistent design concept of German AR or Audio Reality (Music Fax) . The sound is extremely domineering, clear and detailed, plump and powerful; the appearance is elegant and highly visual, which conforms to artificial body science. ARH has a unique high-fidelity 8-inch IF driver and a 1-inch titanium film high-frequency unit. ARH's 8-inch IF driver and 1-inch titanium film high-frequency unit are mounted on the German AR patented conjoined Karst Horn. The high midrange horn of the German AR patented conjoined Karst Horn uses a unique polygonal horn and constant curvature phase plug. , The driver uses an 8-inch intermediate frequency unit, without the sharp metallic sound of a traditional compression driver. The intermediate frequency crossover point of ARH is increased to around 5KHZ, which avoids the phase disorder and intermediate frequency sound distortion caused by the traditional 1KHZ-2KHZ crossover point. Keep the human ear's most sensitive mid-frequency sound natural, smooth and integrated. The German AR patented conjoined Karst Horn horn and special crossover design increase the control of the ARH line array on the sound directivity. ARH can achieve a 90° horizontal projection angle within a certain long distance. ARH has a very high sensitivity, and it does not need a lot of electric power to get a large sound pressure level output. ARH is very suitable as a FOH main sound reinforcement or supplementary sound box for large and medium-sized systems, and can also be used as a near field supplementary for AR-LINE system. Multiple ARH linear array speakers can be combined vertically or horizontally into a large linear array. The ARH line array is used as the FOH main sound reinforcement and supplementary sound system, which is widely used in high-demand mobile performances, high-end bars and nightclubs, large studios, professional theater theaters, high-demand multifunctional halls and large high-end conference centers, etc. occasion.

ARH

Technical Parameters

Unit composition: midrange unit Italian Fita custom midrange driver, 8 inches (200 mm) paper cone, 2 inches (51 mm) voice coil

High frequency Italian 18-sound custom compression driver, 1 inch (25 mm) hose, 1.7 inch (44 mm) voice coil/stone titanium composite membrane

Frequency response (-3dB): 120-20000 Hz

Frequency response (-10dB): 100-22000 Hz

Horizontal coverage angle (-6dB): 90 degrees

Vertical coverage angle (-6dB): 55 degrees

Sensitivity: 112dB/1W.1m

Continuous sound pressure level output: 138 decibels

The highest sound pressure level output: 144 decibels

Standard impedance: LF=8 ohm, HF=8 ohm

Input power: 200 watts (rated) / 400 watts (program) / 800 watts (peak)

Recommended amplifier power: 200-500 watts/8 ohm load state

Crossover point: Passive crossover of medium and high frequency 5000Hz

Medium and high frequency horn: Patented conjoined Karst Horn with constant curvature phase plug

Box: 18mm Finnish birch wooden box

Lifting points: 22 M10 lifting screw holes

Surface treatment: black environmentally friendly elastic matte polyurea paint (color can be customized according to customer requirements)

Face net: Molded steel face net

Input connector:        2 parallel NEUTRIKSPEAKONNL4MP sockets

            1+/ positive pole; 1-/negative pole

Dimensions (height X width X depth): 446 mm X 493 mm X 467 mm

Net weight: 23 kg